œ 平成 ™š 年 ˜™ 月 ˜™ 日 月曜日 官 報 (号外政府調達第 ™š™ 号) 4 説明会の開催 本公表に基づく導入説明会を 開催する。 \ 開催日時 平成23年12月19日10時30分 ] 開催場所 東北大学未来科学技術共同研究 センター1階小会議室 5 その他 この導入計画の詳細は導入説明書に よる。なお、本公表内容は予定であり、変更す ることがあり得る。 6 Summary \ Classification of the products to be procured : 12 ] Nature and quantity of the products to be purchased : Wafer Polishing Equipment 1 Set ^ Type of the procurement : Purchase _ Basic requirements of the procurement : A φ300¤ wafer support : A combined specification for φ200¤-φ300¤ wafers, supporting grinding, chemical mechanical polishing (CMP), high-level cleaning and edge trimming. B Configuration : A 4-axis unit for rough grinding (Z1), finishing (Z2), CMP (Z3) and CMP finishing (Z4). C Cleaning functions : Support for the following chemicals. Alkaline chemicals (SC-1, etc.), acidic chemicals (citric acid, etc.) and ozone water. Moreover, the equipment should have a mechanism allowing brush-cleaning of the wafer surface (ground surface) using a PVA brush. D Particle countermeasures : The unit should have a fan filter unit (FFU) installed with a ULPA filter. E Supported thickness for workpiece transfer : Maximum supported total workpiece thickness : 1.5¤ or more. F Non-contact thickness measurement : In-process non-contact workpiece thickness measurement. G Process load control : Controlling the contact pressure by a pressure sensor during CMP. (Detectable load range : 0∼ 2,000 N) Chuck table : A chuck table with a water-cooling mechanism. I Transfer arm clamp : The transfer arm for ground wafer should be an edgeclamp type instead of a vacuum type. Moreover, wet transfer is used using deionized water to prevent the ground surface from drying during transfer. J Edge trimming a Edge trimming for before/after wafer bonding. b Cleaning with ozone water after grinding c Support for half cut dicing d Support for half-cutting of φ200mmφ300mm wafers. K Slurry : Support for the following types of slurry Composition : Alkaline, organic alkaline ; Abrasive : Silica ` Time limit for the submission of the requested material : 5 : 00 PM 20, January, 2012 a Contact point for the notice : Higuchi Hideki, Procurement Section, Finance Department, Tohoku University, 2`1`1 Katahira Aoba-ku Sendai-shi 980`8577 Japan, TEL 022`217`4869 H 資料提供招請に関する公表 次のとおり物品の導入を予定していますので、 当該導入に関して資料等の提供を招請します。 平成 23 年 12 月 12 日 国立大学法人大阪大学総長 平野 俊夫 ◎調達機関番号 415 ◎所在地番号 27 〇第1号 1 調達内容 \ 品目分類番号 14 ] 導入計画物品及び数量 スーパーコンピュータシステム 一式 ^ 調達方法 借入 _ 導入目的 本システムは大学等の広範囲に わたる学術研究に対して、大規模かつ超高速 の演算処理機能を提供するため、全国共同利 用施設である本学サイバーメディアセンター 大規模計算システムの一部として導入するも のである。 ` a 導入予定時期 平成25年度7月以降 調達に必要とされる基本的な要求要件 A スーパーコンピュータとして、世界的な 尺度で第一線級の処理能力を有し、それを 維持可能なシステムであること。 B 現有スーパーコンピュータシステムNE C SX`8RおよびSX`9の20倍以上 の能力を有し、同システムとFortran 90言 語のソースコード・レベルで互換性を有す ること。 C 主記憶容量は200TB以上であること。 D ファイル・システムは8PB以上である こと。 E ネットワーク・システムは、本システム 内及び外部を、安全に安定してかつ高速に 接続できること。 F 研究者が手元で使っているデスクトッ プ・ワークステーションとの親和性を有 し、そのバックエンド・システムとして大 規模な計算機資源を提供可能であること。 G 現有システムにおいて提供されているラ イブラリやアプリケーションによって提供 されている機能を包含するソフトウェアを 備えていること。データ解析・可視化及び データアーカイブ機能を備えていること。 H 全国共同利用施設としてのサイバーメ ディアセンターの責務を果たすために必要 な運用管理機能及び保守支援体制を持って いること。 2 資料及びコメントの提供方法 上記1]の物 品に関する一般的な参考資料及び同aの要求要 件等に関するコメント並びに提供可能なライブ ラリーに関する資料等の提供を招請する。 \ 資料等の提供期限 平成24年1月25日17時 15分(郵送の場合は必着のこと。 ) ] 提供先 〒565`0871 吹田市山田丘1`1 大阪大学財務部吹田調達センター室調達第 二係 柳生 弘和 電話06`6879`4010 3 説明書の交付 本公表に基づき応募する供給 者に対して導入説明書を交付する。 \ 交付期間 平成23年12月12日から平成24年 1月25日まで。 ] 交付場所 上記2]に同じ。 4 説明会の開催 本公表に基づく導入説明会を 開催する。 \ 開催日時 平成23年12月15日11時00分 ] 開催場所 大阪大学サイバーメディアセン ター本館3階大会議室 5 その他 この導入計画の詳細は導入説明書に よる。なお、本公表内容は予定であり、変更す ることがあり得る。 Summary 6 \ Classification of the products to be pro- cured : 14 ] Nature and quantity of the products to be rent : Super Computer System 1 Set ^ Type of the procurement : Rent _ Basic requirements of the procurement : The product must have performance in A the highest level in the world and it must be able to keep that. The total processing performance of B the product must be 20 at least times greater than the NEC SX-8R and SX-9 that we have used before, and it must be compatible with the Fortran90 source code in our system. The main memory must be 200 TBytes C or larger. The total amount of external disk stor- D age must be 8 PBytes or larger. The product must be equipped with se- E cure, stable and high-speed network systems for internal and external connections. The product must be friendly with de- F sktop workstations that researchers use, while providing huge computational resource as their back-end system. G The product must have softwares in- cluding both the function of libraries and applications which our system have provided. And it must have the functionalities of data analysis, visualization and archiving.