平成  年  月  日 木曜日 官 報 (号外政府調達第  号) ^ Nature and quantity of the services to be required : Adequacy Verification for System management at the Japan Patent Office 1 set _ Fulfillment period : From 1 September 2011 through 31 March 2015 ‘ Fulfillment place : As per the specifications a Qualification for participating in the tendering procedures : Suppliers eligible for participatng in the proposed tender are those who : { Do not come under Article 70 of the Cabinet Order concerning the Budget, Auditing and Accounting. Furthermore, minors, Person under Conservatorship or Person under Assistance that obtained the consent necessary for concluding a contract may be applicable under cases of special reasons within the said clause ; | Do not come under Article 71 of the Cabinet Order concerning the Budget, Auditing and Accounting ; } Have Grade A or B in offer of service in terms of the qualification for participating in tenders by Ministry of Economy, Trade and Industry (Single qualification for every ministry and agency) in the fiscal years 2010, 2011 and 2012 ; 〜 Are not the subject of an order prohibiting them from receiving subsidies from the Ministry of Economy, Trade and Industry (METI) ; an order prohibiting them from concluding contracts with METI ; or an order disqualifying them from bidding for METI projects conducted under the designated bidder system. b Time‐limit for tender : 5 : 00 P.M. 11 July 2011 c Contact point for the notice : Mamiko Fujita, 4th Contract Unit Section, Budget and Accounts Division, General Affairs Department, Japan Patent Office, 3‘4‘3 Kasumigaseki, Chiyoda‐ku, Tokyo 100‘8915 Japan TEL 03‘3581‘1101 ext. 2214 c 落札者の決定方法 _の技術審査により落 入札書の提出場所等 札決定の対象となった入札書を提出した入札 入札書の提出場所、契約条項を示す場所、 者であって、当機構の規定に基づいて作成さ 入札説明書の交付場所及び問い合わせ先 次のとおり一般競争入札に付します。 れた予定価格の制限の範囲内で最低価格を 〒305‘0047 茨城県つくば市千現一丁目2 平成 23 年5月 19 日 もって有効な入札を行った者を落札者とす 番地1 独立行政法人物質・材料研究機構 契約担当役 る。 総務部門総務部契約課 小田部宜子 電話 独立行政法人物質・材料研究機構 d 手続における交渉の有無 無。 029‘859‘2097 総務部門総務部参事役 真明 俊宏 e 詳細は入札説明書による。 ] 入札説明書の交付方法 上記3¥の交付場 5 Summary ◎調達機関番号 513 ◎所在地番号 08 所にて交付する。 ¥ Contracting Entity : Toshihiro Shinmei, 〇第 10 号 ^ 入札説明会の日時及び場所 平成23年6月 Councilor, General Affairs Division, Na1 調達内容 1日14時00分 独立行政法人物質・材料研究 tional Institute for Materials Science ¥ 品目分類番号 24 機構千現地区入札室 ] Classification of the products to be pro] 購入等件名及び数量 クリープ試験用温度 cured : 24 _ 入札書の受領期限 平成23年7月11日17時 伸びデータ計測システムの増設 1式 ^ Nature and quantity of the products to be 00分 purchased : Expansion of temperature and ^ 調達件名の特質等 入札説明書及び仕様書 ‘ 開札の日時及び場所 平成23年7月25日14 deformation data acquisition system for による。 時00分 独立行政法人物質・材料研究機構千 creep test 1 Set 現地区入札室 _ 納入期限 平成24年3月28日 _ Delivery period : By 28, March, 2012 ‘ 納入場所 独立行政法人物質・材料研究機 4 その他 ‘ Delivery place : National Institute for ¥ 契約手続において使用する言語及び通貨 構 Materials Science 日本語及び日本国通貨。 a 入札方法 上記1]の件名について入札に a Qualification for participating in the ten] 入札保証金及び契約保証金 免除。 dering procedures : Suppliers eligible for 付する。落札決定に当たっては、入札書に記 ^ 入札者に要求される事項 この一般競争に participating in the proposed tender are 載された金額に当該金額の5%に相当する額 参加を希望する者は、封印した入札書の他に those who shall : を加算した金額(当該金額に1円未満の端数 { not come under Article 1 Clause 4 of 当機構の交付する仕様書に基づき、製作仕様 があるときは、その端数金額を切り捨てるも the Regulation concerning the Contract 書及び付属説明資料等(以下 「製作仕様書等」 のとする。をもって落札価格とするので、入 ) for National Institute for Materials Sciという。を添付して、入札書の受領期限まで ) ence. Furthermore, minors, Person under 札者は、消費税及び地方消費税に係る課税事 に提出しなければならない。入札者は、開札 Conservatorship or Person under Assis業者であるか免税事業者であるかを問わず、 日の前日までの間において、契約担当役から tance that obtained the consent necessary 見積もった契約金額の105分の100に相当する 製作仕様書等に関し説明及び協議を求められ for concluding a contract may be appli金額を入札書に記載すること。 た場合は、 それに応ずる義務を負うものとし、 cable under cases of special reasons with必要な場合には製作仕様書等の変更に応ずべ 2 競争参加資格 in the said clause, きものとする。 ¥ 独立行政法人物質・材料研究機構契約事務 | not come under Article 2 Clause 4 of _ 技術審査 契約担当役が入札者の作成した the Regulation concerning the Contract 細則第4条第1項の規定に該当しない者であ 製作仕様書等を‘に示す技術審査基準により for National Institute for Materials Sciること。 ence, 審査し、採用し得ると判断した製作仕様書等 なお、未成年者、被保佐人又は被補助人で } have the Grade A, Grade B, Grade C or を提出した入札者の入札書のみを落札決定の あって、契約締結のために必要な同意を得て Grade D qualification during fiscal 2010, 対象とする。 いる者は、同条中、特別な理由がある場合に 2011, 2012 in manufacture of product or ‘ 技術審査基準 製作仕様書等が当機構の交 該当する。 in sales of product for participating in 付する仕様書に示す事項を満たしており、使 tenders by every ministry and agency. ] 独立行政法人物質・材料研究機構契約事務 用目的等に適合すると認められたものである b Time‐limit of tender : 5 : 00 PM, 11, July, 細則第4条第2項の規定に該当しない者であ こと。 2011 ること。 a 入札の無効 本公告に示した競争参加資格 c Contact point for the notice : Noriko ^ 平成22・23・24年度全省庁統一資格「物品 のない者の提出した入札書、入札者に求めら Otabe, Contract Section, General Affairs の製造」又は「物品の販売」のA、B、C又 れる義務を履行しなかった者の提出した入札 Division, National Institute for Materials はDの等級に格付けされている者であるこ 書は無効とする。 Science, 1‘2‘1 Sengen, Tsukuba‐shi, Ibab 契約書作成の要否 要。 raki, 305‘0047 Japan, TEL 029‘859‘2097 と。 入札公告 3 ¥