平成  年  月  日 木曜日 官 報 (号外政府調達第  号) 5 その他 この導入計画の詳細は導入説明書に よる。なお、本公表内容は予定であり、変更す ることがあり得る。 6 Summary ¥ Classification of the services to be procured : 71, 27 ] Nature and quantity of the services to be required : Educational Computer System 1 Set ^ Type of the procurement : Require _ Basic requirements of the procurement : A The system should support various educational activities in the University of Tokyo. B The system should consist of servertype computers, terminal clients and other related devices. C The system should supply various application programs and environments suitable for the University of Tokyo. D The system should work efficiently for simultaneous use via networks of the University of Tokyo. E The system should be maintainable with little effort and low security risks. F The system should have power saving features. G The system should be fully supported for preventive maintenance and prompt recovery. ‘ Time limit for the submission of the requested material : 5 : 00 PM 28, February, 2011 a Contact point for the notice : Kouichirou Oohashi, Procurement Section, Accounting Division, Information Technology Center, The University of Tokyo, 2‘11‘16 Yayoi Bunkyo‐ku Tokyo 113‘8658 Japan, TEL 03‘5841‘2707 資料提供招請に関する公表 次のとおり物品の導入を予定していますので、 当該導入に関して資料等の提供を招請します。 平成 23 年1月6日 国立大学法人東京海洋大学 事務局長 鈴木 優子 ¥ 開催日時 平成23年1月14日14時00分 ◎調達機関番号 415 ◎所在地番号 13 ] 開催場所 東京海洋大学越中島キャンパス 〇第1号 一号館第1会議室 1 調達内容 5 その他 この導入計画の詳細は導入説明書に ¥ 品目分類番号 11、16 よる。なお、本公表内容は予定であり、変更す ] 導入計画物品及び数量 環 境 適 応 型 船 舶 ることがあり得る。 ディーゼル機関実習装置 一式 6 Summary ^ 調達方法 購入等 ¥ Classification of the products to be pro_ 導入予定時期 平成23年度1月以降 cured : 11, 16 ‘ 調達に必要とされる基本的な要求要件 舶 ] Nature and quantity of the products to be 用ディーゼル機関を中心とした実験実習設備 purchased : Environmentally friendly maであり、以下の特徴を有すること。 rine two‐stroke diesel engine experiment  設備は、ディーゼル機関本体と機関の運 and training system 1 Set 転に必要な水制動力計、負荷制御装置、遠 ^ Type of the procurement : Purchase 隔操縦装置、冷却水ポンプ、 潤滑油ポンプ、 _ Basic requirements of the procurement : 熱交換器、空気圧縮機、始動空気タンクな To be the experiment and training system どから構成されること。 with marine diesel engine and to possess the  機関本体は、2ストローク、クロスヘッ following characteristics. ド構造で過給機を備え、シリンダ数は3以  The system consists of a marine diesel 上 で あ り、 軸 出 力 (最 大 時) は 1 500 〜 ¶ engine, a water break system, an engine 2 100kWの範囲であること。 ¶ load control system, a remote control sys 燃料油に重油(JIS1種1号、1種2 tem, cooling water pumps, a lubricating 号、2種、3種1号相当)を使用できるシ oil pump, heat exchangers, air compressステムであること。 or, air tank etc. with the following speci 機関定格出力の 25 %から 100 %の出力で fications 安定した運転ができる設備であること。  The diesel engine is a two‐stroke,  機関の燃料噴射、排気弁駆動、シリンダ cross‐head type, exhaust turbocharged 注油は電子制御方式を採用し、かつ、使用 marine diesel engine and it has three or 者によるタイミングの変更・調整が可能で more cylinders. Maximum continuous あること。 power of the engine is approximately  設備は、東京海洋大学越中島キャンパス 1500 to 2100 kW. 第2実験棟内に設置すること。  The system can use heavy fuel oil sti2 資料及びコメントの提供方法 上記1]の物 pulated by JIS standard (JIS K2205) for 品に関する一般的な参考資料及び同‘の要求要 Category 1 No. 1 and No. 2, Category 2, 件等に関するコメント並びに提供可能なライブ Category 3 No. 1. ラリーに関する資料等の提供を招請する。  The system should have a capability of ¥ 資料等の提供期限 平成23年2月7日17時 stable operation within engine load range 00分(郵送の場合は必着のこと。 ) of 25 % to 100 %. ] 提供先 〒108‘8477 東京都港区港南4‘  Fuel injection mechanism, exhaust 5‘7 東京海洋大学経理課調達・船舶係 valve driving mechanism and cylinder oil 尾崎 克洋 電話03‘5463‘0368 lubricator should be controlled elect3 説明書の交付 本公表に基づき応募する供給 ronically and their action timing should 者に対して導入説明書を交付する。 be adjusted by users. ¥ 交付期間 平成23年1月6日から平成23年  The system should be installed in the 2月7日まで。 ] 交付場所 上記2]に同じ。 Number 2 Research Building at Etc4 説明会の開催 本公表に基づく導入説明会を hujima Campus of Tokyo University of 開催する。 Marine Science and Technology. ‘ Time limit for the submission of the requested material : 5 : 00 PM 7, February, 2011 a Contact point for the notice : Katsuhiro Ozaki, Procurement Section, Accounting Division, Tokyo University of Marine Science and Technology, 4‘5‘7 Konan Minato‐ku Tokyo 108‘8477 Japan, TEL 03‘ 5463‘0368 意見招請に関する公示 次のとおり調達物品の仕様書案の作成が完了し たので、仕様書案に対する意見を招請します。 平成 23 年1月6日 独立行政法人国立病院機構 善通寺病院長 田村 禎通 ◎調達機関番号 597 ◎所在地番号 37 〇第 12104 号(c12104) 1 調達内容 ¥ 品目分類番号 22、31 ] 購入等物品及び数量 マルチスライスCT 一式 2 意見の提出方法 ¥ 意見の提出期限 平成23年2月4日17時00 分(郵送の場合は必着のこと。 ) ] 提出先 〒765‘8507 香川県善通寺市仙遊 町2‘1‘1 独立行政法人国立病院機構善 通寺病院企画課長 山田 茂晴 電話0877‘ 62‘2211 内線310 3 仕様書案の交付 ¥ 交付期間 平成23年1月6日から平成23年 2月4日まで。 ] 交付場所 上記2]に同じ。 4 Summary ¥ Classification of the products to be procured : 22, 31 ] Nature and quantity of the products to be procured : Multi‐Slice Computed tomography 1 set ^ Time‐limit for the submission of comments : 5 : 00 P.M February 4, 2011 _ Contact point for the notice : Shigeharu Yamada, Director, Accounting Division, National Hospital Organization Zentsuji National Hospital, 2‘1‘1, Senyu‐cyo, Zentsuji‐shi, Kagawa‐ken, 765‘8507, Japan. TEL 0877‘62‘2211 ext.310