平成  年  月  日 木曜日 官 報 (号外政府調達第  号) 〜 注射薬オーダリングシステムで入力され た投与方法、ルート等のコメントが注射薬 処方せん、ラベル等に印字できること  アンプル製剤、バイアル製剤の他にキッ ト製剤、ボトル製剤等の取り揃えができる ことが望ましい  内服薬等の処方オーダリングシステムと の連携ができること  内服薬等の処方オーダリングシステムと の連携により、併用禁忌等のチェックがで きること  抗がん剤等のレジメンに対する支援機能 を有すること  注射薬を保管するトレイ、カートは必要 な病棟分を装備できること … 取り揃え速度が現行(300 Rp/時間) の1 5倍以上であること f 抽出機能として定時、臨時等を選択して 実施予定日や払い出し先を指定して抽出で きること g 抗がん剤やTPN等のミキシングが必要 な処方を自動で抜き出し、別払い出しがで きること h 各種統計データの抽出、出力ができるこ と 2 資料及びコメントの提供方法 上記1]の物 品に関する一般的な参考資料及び同‘の要求要 件等に関するコメント並びに資料等の提供を招 請します。 ¥ 資料等の提出期限 平成22年10月12日14時 00分(現地時間) (郵送の場合は必着のこと) ] 提出先 〒141‘8625 東京都品川区東五反 田5‘9‘22 東日本電信電話株式会社関東 病院 企画担当 冨宇加 進 電 話(03)3448‘6126 ファックス(03)3448‘6127 なお、NTT東日本ホームページ http://www.ntt‐east.co.jp/purchase/ inquiry/index.html 記載窓口においても問 い合わせを行います。 3 Summary ¥ Classification of the products to be Procured : 22, 31 ] Name and quantity of the products to be Purchased : Full Automatic Injectable Drug Dispensing System 1 set ^ Type of the procurement : purchase _ Introductory schedule time : March, 2011 ‘ Basic requirements of the procurement : { It is necessary to be able to synchronize with the ordering system, and be able to get the injectable drug data from the ordering system. | The print of the prescription, the fluid infusion bottle label, and the bar code should be able to be printed from the injectable drug dispensing machine. } The Bar code should be printed as two dimensional bar code or two dimensional symbols. 〜 The comment (administration method and route) input by the order should be able to be printed on the prescription and the fluid Infusion bottle label.  The injection medicine taking out machine should be able to take out not only the ampoule and vial but also the medicine made out of the kit and bottles.  It is necessary to be able to synchronize with the prescription preparation system for the internal and external medicines.  The interaction check between the prescription for the internal medicines and the prescription for the injection should be able to be done.  It is necessary to be a support system for chemotherapy regimens.  Trolleys and trays to keep injections shall be equipped enough to dispense to each ward. … Dispensing speed of the system must be 1.5 times higher than current system (300Rp/hour). f The system shall include function to extract prescriptions by date of dispense, ward to be dispensed, after sorting by subscribed prescriptions, urgent prescription, and so on. g The system shall be acquired to auto‐ 4 仕様書案の説明会 ¥ 開催日時 平成22年9月6日14時00分 matically extract specific prescriptions ] 開催場所 国立大学法人筑波大学附属病院 that contained preparation to be coB棟2階第1会議室 mpounded like chemotherapy medicines and TPN, and to dispense applicable me‐ 5 Summary ¥ Classification of the products to be prodicines by specific method. cured : 22, 31 h The system shall be able to output vari] Nature and quantity of the products to be ous statistical reports. rent : The integrated physiology function a Time‐limit for the submission of the Reinspection system 1 Set quested material : ^ Time limit for the submission of com2 : 00 PM Oct 10, 2010 (Local Time) ments : 5 : 00 PM 29, September, 2010 b Contact point for the notice : _ Contact point for the notice : Noboru Saa.NTT MEDICAL CENTER TOKYO 5‘ wabe, First Section of Contract, Division of 9 ‘ 22 Higashi‐gotanda Shinagawa‐ku, Finance, Department of University HospiTokyo Japan tal Management, University of Tsukuba, TEL : 81^3448‘6126 2‘1‘1 Amakubo Tsukuba‐Shi 305‘8576 FAX : 81^3448‘6127 Japan, TEL 029‘853‘3515 Attn. : Susumu Tomiuka 意見招請に関する公示 b. Overseas contact points described on the following URL. 次のとおり調達物品の仕様書案の作成が完了し http://www.ntt‐east.co.jp/purchase/ たので、仕様書案に対する意見を招請します。 inquiry/index.html 平成 22 年8月 26 日 国立大学法人東京大学総長 濱田 純一 意見招請に関する公示 ◎調達機関番号 415 ◎所在地番号 13 次のとおり調達物品の仕様書案の作成が完了し 〇第 20 号 1 調達内容 たので、仕様書案に対する意見を招請します。 ¥ 品目分類番号 24 平成 22 年8月 26 日 ] 購入等物品及び数量 1000テスラ超強磁場 国立大学法人筑波大学 発生用初期磁場用電源 一式 附属病院長 五十嵐徹也 2 意見の提出方法 ◎調達機関番号 415 ◎所在地番号 08 ¥ 意見の提出期限 平成22年9月16日17時00 〇第2号 分(郵送の場合は必着のこと。 ) 1 調達内容 ] 提出先 〒 277‘ 8581 千葉県柏市柏の葉 ¥ 品目分類番号 22、31 5‘ 1‘ 5 東京大学柏地区共通事務セン ] 借入物品及び数量 統合生理機能検査シス ター契約係 五十嵐征美 電話 04‘ 7136‘ テム 一式 3486 2 意見の提出方法 3 仕様書案の交付 ¥ 意見の提出期限 平成22年9月29日17時00 ¥ 交付期間 平成22年8月26日から平成22年 分(郵送の場合は必着のこと。 ) 9月16日まで。 ] 提出先 〒305‘8576 つくば市天久保2丁 ] 交付場所 上記2]に同じ。 目1番地の1 国立大学法人筑波大学病院総 4 仕様書案の説明会 務部管理課契約第一 澤邊 昇 電話 ¥ 開催日時 平成22年9月2日14時00分 029‘853‘3515 ] 開催場所 東京大学物性研究所6階第3会 3 仕様書案の交付 議室(千葉県柏市柏の葉5‘1‘5) ¥ 交付期間 平成22年8月26日から平成22年 5 Summary 9月29日まで。 ¥ Classification of the products to be pro] 交付場所 上記2]に同じ。 cured : 24