FWREADME.TXT                                           29-Nov-2007
_____________________________________________________________________
Seagate Technology LLC
Seagate Firmware Upgrade Utility v4
_____________________________________________________________________
Copyright (c) 2007 by Seagate Technology, LLC. All rights reserved.

Welcome to the Seagate Certificate Download Firmware Upgrade.

The ZIP file you downloaded from the Certificate Download system
contains two files supporting either a bootable floppy diskette or
bootable CD-ROM disc. Both versions boot to the FreeDOS operating
system.

* The file with the EXE extension is a bootable floppy diskette
creator that runs from Windows.  It will overwrite any data on the
1.44MB floppy diskette.

* The file with the ISO extension is a bootable CD-ROM image file.
This file will need to be burned to a blank CD-ROM.  For instructions
on how to burn ISO images please see this Seagate Support Knowledge
Base article # 4933 located here:
http://seagate.custhelp.com/cgi-bin/seagate.cfg/php/enduser/std_adp.php?p_faqid=4933.

_____________________________________________________________________

Welcome to Seagate's Firmware Upgrade Utility and Procedures.

Seagate highly recommends that you do a complete system backup of all
data on your hard drive prior to performing a firmware upgrade to
ensure there is no chance of data loss during the process.  Seagate is
not responsible for any data loss that may occur during or after your
firmware upgrade.

Read the End User License Agreement below.

Basic instructions:
1) Create the  FreeDOS bootable floppy or CD-ROM.
2) Use a standard desktop PC with an integrated SATA controller, or
   a common SATA add-in controller like a Promise SATA150-TX2.
3) Disconnect all PATA or SATA devices from the system, except the
   device needing the firmware update.
4) Boot the system using the update floppy or CD.
5) Follow the onscreen prompts.

***WARNING************************************************************
** DO NOT POWER DOWN the system or the drive during this upgrade
   process. If power is lost during a firmware upgrade, the drive will
   be destroyed.
** WAIT until all drive LED activity has ceased before powering off
   the drive. Your system should come back to the message "Cycle power
   to continue..." after the software finishes uploading the firmware.
** DO NOT use this software for any other purpose than the specific
   firmware upgrade. Improper use of this tool can quickly destroy the
   drive.
**********************************************************************

_____________________________________________________________________

Troubleshooting
---------------

FIRMWARE UTILITY WILL NOT LOAD

- If when you insert the firmware diskette or CD and power on the
  computer, it does not load the firmware utility, the "boot sequence"
  may be set to boot to the hard disc drive first.

  To change the boot sequence to boot from the A: or CD drive first,
  you must enter the "Setup" or "CMOS Setup" of your computer. Methods
  for entering the Setup or CMOS Setup vary depending on your
  computer's make and model, but most methods consist of pressing a
  key or key sequence during the initial power on boot sequence.

  Watch the screen closely during boot up for a message like "Press F2
  to enter Setup" or something similar to determine which key or key
  sequence to press for your computer. Nearly all systems will
  continue on automatically after a brief period of time if the key is
  not pressed, so act quickly. You may have only a few seconds to find
  and press the appropriate key or key sequence.

  The most common keys or key sequences to enter setup are:
  - [F2]
  - [DELETE]
  - [F1]
  - [CTRL]-[ALT]-[S]
  - [CTRL]-[ALT]-[ESC]
  - [CTRL]-[ALT]-[ENTER]

  NOTE: Some computers that use the "[CTRL]-[ALT]-[___]" sequences
  must be at a prompt before pressing the keys. If you are unsure
  about how to enter the setup, see the owner's manual for your
  computer or seek assistance from your computer manufacturer or the
  store where you purchased the computer.

CD ROM WILL NOT BOOT

- Booting to a CD requires that the system BIOS is compatible with the
  operating system on the CD.  In rare cases that seem tied to older
  systems, this indicates an incompatibility with the boot CD.  In
  this situation, the solution is to use the firmware boot floppy
  diskette instead of the boot CD.

DISKETTE WRITE ERRORS

- The diskette may have a bad sector. If this is the case, create a
  new firmware diskette and run the tests again.

_____________________________________________________________________

Seagate Technology Support Services

Online Services
---------------
Internet
www.seagate.com for information about Seagate products and services.
Worldwide support is available 24 hours daily by e-mail for your
questions.

Technical Support:
http://www.seagate.com/www/en-us/about/contact_us
or email to DiscSupport@Seagate.com

SEAGATE SERVICE CENTERS
-----------------------
Presales Support
1-877-271-3285 or +1-405-936-1210       FAX: +1-405-936-1683

Technical Support
1-800-SEAGATE  or +1-405-324-4730

Warranty Service
USA               1-800-468-3472        FAX: +1-405-949-6740

European Support Services
-------------------------
For European customer support, dial the toll-free number for your
specific country for presales support and technical support.

If your country is not listed here, dial our European call center at
+1-405-324-4714 from 8:00 A.M. to 5:00 P.M. (European central time)
Monday through Friday.

Call Center
Belgium               00800-4732-4283
Denmark               00800-4732-4283
France                00800-4732-4283
Germany               00800-4732-4283
Ireland               00800-4732-4283
Italy                 00800-4732-4283
Netherlands           00800-4732-4283
Norway                00800-4732-4283
Poland                00800-311-1238
Spain                 00800-4732-4283
Sweden                00800-4732-4283
Switzerland           00800-4732-4283
Turkey                00 800-31 92 91 40
United Kingdom        00800-4732-4283


Africa/Middle East Support Services
-----------------------------------
For Africa and Middle East customer support, dial the toll-free number
for your specific country for presales support and technical support.

If your country is not listed here, dial our European call center at
+1-405-324-4714 from 8:00 A.M. to 5:00 P.M. (European central time)
Monday through Friday.


Asia/Pacific Support Services
-----------------------------
Technical Support
Australia                       1-800-14-7201
Hong Kong (English)             800-90-0474
Hong Kong (Mandarin/Cantonese)  001-800-0830-1730
Japan                           0034-800-400-554
Singapore                       800-1101-150
Taiwan                          00-800-0830-1730

Warranty Service
Japan                           +65-6485-3595
Asia/Pacific and                +65-6485-3595
Australia                       1-800-12-9277

_____________________________________________________________________

FreeDOS and the GNU Public License
-----------------------------------
This software uses the FreeDOS kernel, an open source product
distributed under the terms of the GNU Public License (GPL). You can
obtain the source code to the FreeDOS kernel used for this product at
http://www.seagate.com/support/seatools/freedos/kernel.zip
You can obtain the most recent copy at the FreeDOS we site at
http://www.freedos.org.
_____________________________________________________________________

Seagate Firmware Upgrade Utility

End User License Agreement

THIS IS A LEGAL AGREEMENT ("AGREEMENT") BETWEEN YOU AND SEAGATE
TECHNOLOGY, LLC ("LICENSOR"). PLEASE READ THIS AGREEMENT CAREFULLY. BY
CLICKING THE "I ACCEPT" BUTTON OR TAKING ANY STEP TO DOWNLOAD, SET-
UP, INSTALL OR USE THIS SOFTWARE, YOU AGREE, ON BEHALF OF YOURSELF AND
YOUR COMPANY, IF THE SOFTWARE IS TO BE USED FOR BUSINESS PURPOSES,
(COLLECTIVELY "LICENSEE"), TO BE BOUND BY ALL OF THE TERMS AND
CONDITIONS OF THIS AGREEMENT.  IF YOU DO NOT AGREE TO THESE TERMS AND
CONDITIONS, CLICK "I DO NOT ACCEPT" AND YOU WILL NOT BE PERMITTED TO
DOWNLOAD THE SOFTWARE OR IF YOU RECEIVED A CD CONTAINING THE SOFTWARE,
RETURN THE SOFTWARE TO LICENSOR.

1.  License Grant.  Licensor grants to Licensee a worldwide,
nonexclusive, nontransferable, royalty free license to use the Seagate
Firmware Upgrade Utility software (the "Software") with Seagate and
Maxtor branded disc drives only. Licensee is permitted to make a
single copy of the Software for backup purposes. Except as expressly
authorized above or as permitted by applicable law, Licensee will not:
copy, in whole or in part, Software or any related documentation;
modify the Software; reverse compile, reverse engineer, disassemble or
reverse assemble all or any portion of the Software; rent, lease,
license, sublicense, distribute, transfer or sell the Software; or
create derivative works of the Software.  Licensee obtains no rights
in the Software except those given in this limited license.

2.  Ownership.  The Software, any related documentation and all
intellectual property rights therein are owned by Licensor, its
affiliates and/or its suppliers. The Software is licensed, not sold.
Copyright laws and international copyright treaties, as well as other
intellectual property laws and treaties, protect the Software.
Licensee will not remove, alter or destroy any copyright, proprietary
or confidential notices placed on the Software or any related
documentation.  Licensee agrees that aspects of the Software,
including the specific design and structure of individual programs,
constitute trade secrets and/or copyrighted or patented material of
Licensor, its affiliates and/or its suppliers. Licensee agrees not to
disclose, provide, or otherwise make available such trade secrets or
material in any form to any third party without the prior written
consent of Licensor.  Licensee agrees to implement reasonable security
measures to protect such trade secrets and material.

3.  NO WARRANTIES.  TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW
AND SUBJECT TO ANY STATUTORY WARRANTIES THAT CANNOT BE EXCLUDED, THE
SOFTWARE AND ANY RELATED DOCUMENTATION ARE PROVIDED TO LICENSEE "AS
IS."  LICENSOR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND EXPRESSLY
DISCLAIMS AND EXCLUDES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW ALL REPRESENTATIONS, ORAL OR WRITTEN, TERMS, CONDITIONS, AND
WARRANTIES, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY
QUALITY AND NONINFRINGEMENT.  WITHOUT LIMITING THE ABOVE, LICENSEE
ACCEPTS THAT THE SOFTWARE MAY NOT MEET LICENSEE'S REQUIREMENTS,
OPERATE ERROR FREE, OR IDENTIFY ANY OR ALL ERRORS OR PROBLEMS, OR DO
SO ACCURATELY.  LICENSEE USES THE SOFTWARE AT HIS/HER OWN RISK. This
Agreement does not affect any statutory rights Licensee may have as a
consumer.

4.  EXCLUSION OF CONSEQUENTIAL AND OTHER DAMAGES.  TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR, ITS
AFFILIATES OR ITS SUPPLIERS BE LIABLE TO LICENSEE, LICENSEE'S
CUSTOMERS, OR OTHER USERS, FOR DAMAGES OF ANY KIND INCLUDING, WITHOUT
LIMITATION, DIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL, OR INDIRECT
DAMAGES OF ANY KIND ARISING OUT OF THE LICENSE OF, USE OF, OR
INABILITY TO USE THE SOFTWARE (INCLUDING, WITHOUT LIMITATION, DATA
LOSS OR CORRUPTION, ECONOMIC LOSS, LOSS OF ACTUAL OR ANTICIPATED
PROFITS, LOSS OF CONFIDENTIAL INFORMATION, BUSINESS INTERUPTION, LOSS
OF PRIVACY, FAILURE TO MEET ANY DUTY OF REASONABLE CARE OR NEGLIGENCE)
EVEN IN THE EVENT OF THE FAULT, TORT, STRICT LIABILITY, BREACH OF
CONTRACT, BREACH OF STATUTORY DUTY OR BREACH OF WARRANTY OF LICENSOR,
ITS AFFILIATES OR SUPPLIERS AND EVEN IF LICENSOR, ITS AFFILIATES OR
ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
SUCH DAMAGES WERE FORESEEABLE.  SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTIAL OR CONSEQUENTIAL DAMAGES SO THE
ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY.

5.  LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, IN NO EVENT WILL LICENSOR'S LIABILITY EXCEED THE
LICENSE FEE PAID BY LICENSEE OR US$5.00, WHICHEVER IS GREATER. THIS
LIMITATION OF LIABILITY AND RISK IS REFLECTED IN THE PRICE OF THE
SOFTWARE. NOTWITHSTANDING THE FOREGOING, NOTHING IN THIS AGREEMENT
SHALL EXCLUDE OR LIMIT LICENSOR'S LIABILITY TO LICENSEE FOR ANY
LIABILITY THAT CANNOT, AS A MATTER OF APPLICABLE LAW, BE EXCLUDED OR
LIMITED.

6.  INDEMNIFICATION. BY ACCEPTING THIS AGREEMENT, LICENSEE AGREES TO
INDEMNIFY AND OTHERWISE HOLD HARMLESS LICENSOR, ITS OFFICERS,
EMPLOYEES, AGENTS, SUBSIDIARIES, AFFILIATES, SUPPLIERS AND OTHER
PARTNERS FROM ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL
OR EXEMPLARY DAMAGES ARISING OUT OF, OR RELATING TO, OR RESULTING FROM
LICENSEE'S USE OF THE SOFTWARE OR ANY OTHER MATTER RELATING TO THE
SOFTWARE.

7.  Termination. Licensor may immediately terminate this Agreement and
the license granted hereunder if Licensee fails to comply with the
terms and conditions of this Agreement. Upon such termination,
Licensee must immediately cease using the Software, destroy or delete
all copies of the Software and upon the request of Licensor, certify
the destruction or deletion of the Software. Licensee may terminate
this Agreement and the license granted hereunder at any time by
destroying or deleting all copies of the Software. ALL DISCLAIMERS,
LIMITATIONS OF LIABILITY AND ANY OTHER PROVISIONS INTENDED TO SURVIVE
TERMINATION WILL SURVIVE ANY TERMINATION AND CONTINUE IN FULL FORCE
AND EFFECT.

8.  International Trade Compliance.  The Software and any related
technical data is subject to the customs and export control laws and
regulations of the United States ("U.S.") and may also be subject to
the customs and export laws and regulations of the country in which
the download is contemplated or CD containing the Software is
acquired. Further, under U.S. law, the Software and any related
technical data may not be sold, leased or otherwise transferred to
restricted countries, or used by a restricted end-user or an end-user
engaged in activities related to weapons of mass destruction
including, without limitation, activities related to designing,
developing, producing or using nuclear weapons, materials, or
facilities, missiles or supporting missile projects, or chemical or
biological weapons. Licensee acknowledges that it is not a citizen,
national, or resident of, and is not under the control of the
government of Cuba, Iran, North Korea, Sudan or Syria, and that
Licensee will not download or otherwise export or re-export the
Software and any related technical data directly or indirectly to the
above mentioned countries nor to citizens, nationals, or residents of
those countries. Licensee will comply with all applicable export, re-
export and foreign policy controls and restrictions imposed by the
United States and will take the necessary actions and precautions to
ensure that it complies with all such laws or regulations.

9.  Governing Law. The laws of the State of California, United States,
without regard to conflicts of laws principles, govern this Agreement.
If applicable law does not permit the parties to agree to the
governing law, the laws of the country in which Licensee downloads or
acquires the Software govern this Agreement. To the extent permitted
by applicable law, any dispute arising under this Agreement or
relating to the Software shall be resolved by a court of proper
jurisdiction in Santa Clara County, California, United States.
Licensee and Licensor irrevocably submit to the jurisdiction of such
courts and waive any and all objections to jurisdiction a party may
have under applicable law. Notwithstanding the foregoing, if the
Software is downloaded or acquired in the People's Republic of China,
any dispute arising under this Agreement or relating to the Software
shall be resolved by binding arbitration, held in Santa Clara County,
California, United States, under the Judicial Arbitration and
Mediation Services (JAMS) International Arbitration Rules.

10.  Legal Effect. This Agreement describes certain legal rights.
Licensee may have other rights under applicable law. This Agreement
does not change Licensee's rights under applicable law if such laws do
not permit the Agreement to do so.

11.  Miscellaneous.  This Agreement constitutes the entire agreement
between Licensor and Licensee and governs Licensee's use of the
Software, superseding any prior agreement between Licensor and
Licensee relating to the subject matter hereof. Any change or
modification to this Agreement will only be valid if it is in writing
and signed on behalf of Licensor and Licensee. A failure by either
party to enforce its rights under this Agreement is not a waiver of
those rights or any other rights it has under this Agreement. The
parties disclaim the application of the United Nations Convention on
the International Sale of Goods. The terms of this Agreement are
severable. If any term is unenforceable for any reason, that term will
be enforced to the fullest extent possible, and the Agreement will
remain in effect. The Software and any related technical data are
provided with restricted rights.  Use, duplication, or disclosure by
the U.S. Government is subject to the restrictions as set forth in
subparagraph (c)(1)(iii) of DFARS 252.227-7013 (The Rights in
Technical Data and Computer Product) or subparagraphs (c)(1) and (2)
of 48 CFR 52.227-19 (Commercial Computer Product - Restricted Rights),
as applicable. To the extent permitted by applicable law, Licensee may
not assign this Agreement, and any attempted assignment will be null
and void.  Seagate, the Seagate logo, and other Seagate and Maxtor
names and logos are the trademarks of Seagate Technology LLC or its
affiliates.

12.  Contact Information. Any inquiries regarding this Agreement or
the Software may be addressed to Licensor at 920 Disc Drive, Scotts
Valley, California, USA,  95066, or www.Seagate.com.

Revised 04-06-2007

(C) 2007 Seagate Technology, LLC. End of User License Agreement.

=====================================================================














